Senior Project & Construction Piping and Mechanical Lead Engineer

At Air Products, our purpose is to bring people together to reimagine what’s possible, collaborate and innovate solutions to the world’s most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the world.

Reimagine What’s Possible

II. POSITION SUMMARY
This position is based at the PD JIGPC Jazan Site, working an 8 x 2-weeks, rotational assignment.
The incumbent is responsible for FULL implementation of the Air Products/JIGPC Standards piping and
mechanical ALL International requirements. The incumbent will work closely with the Site Manager /
Project Execution Manager to support entire project execution and completion managed in accordance
with the Project quality, safety, cost and scheduled indicators.
The incumbent is having exposure and detailed knowledge of all phases responsible for Project and
Construction management, Engineering, Quality & Safety standards and hand over to commissioning
team for designated MOC/DN projects. Construction supervision for Civil/Structural, Piping,
Mech/Machinery, E&I, Site Materials and Warehouse.

III. NATURE AND SCOPE

• Description: PD JIGPC
• Project Location: Jazan IGCC, JIGPC Project Delivery.

IV. PRINCIPAL ACCOUNTABILITIES
This position is responsible for the following end results:

• Responsible for delivering a completed project construction, safely, with good quality, on

schedule and within budget under the leadership of Project Manager/Site Manager of JIGPC.

• Organize and oversee and coordinate Contractor’s daily activities during construction and/or

commission/start-up phase, Managing and coordinating specific disciplines for Contractor, such
as Excavation, Concrete, Heavy Lifting, Pipe/Steel Erection, Electrical, Instrument, Painting,
Insulation, Material Receiving, Scaffolding, Pressure Testing, etc.,

• Conduct site daily supervision work; Ensure all work procedures and instructions be implemented

with high compliance rate; Make sure site management systems (Safety, QA/QC, Schedule and
Cost Control) work well. Escalate critical issues to Site manager in time, make sure that all field
construction and commissioning activities are performed in accordance with the provisions of the
Contract and is built as per the Project drawings, specification, and procedure.

• Draft and release construction weekly report timely and appropriately in his work scope. ensure

construction submittal on time of all necessary reports to the relative department (Project,
Construction, QAQC, HSE, Procurement, Design etc.), these submittals such as SDQ, RFI, SI,
MOC, NCR ODS etc., Outstanding issues shall be identified such as schedule delay, potential
claims, permitting issues. Mitigation plan shall be placed in a timely fashion. Closely monitor the
improvement progress.

• Establish and maintain effective communications & coordination among various discipline

construction, immediately stop any unsafety or unqualified quality work practices which likely
result in an incident or are non-compliant with project safety/quality requirement as well as
national regulations.

• As required in the contract, ensure that Contractor inspection and verification activities are

completed. Ensure that status is completed and documented appropriately by the Contractor.

• Support Construction Manager/Senior Managers organize daily and weekly meeting with JIGPC

supervision staffs and Contractor management team.

• Check and review Contractor’s time sheet and progress payment as well as field change request

as per Site/Project Manager’s required; check and review all Contractor technical documents
submittal such as Work Method Statement, Construction Plan, QAQC Plan, RFI (Request for
inspection) etc, Check and review Safety Work Permit and JSA and RAMS.

• Finish site JSA/APT/BSP performance input, Support quality manager conduct Quality Audit,

share the audit results with the Contractor to continuous improvement of their performance.
Report to Construction manager/senior manager of HIDC any potential safety/quality hazards and
unsafe conditions.

• Monitor the work of Contractor and make sure the material supply meeting the Contract

requirement, ensure that the Contractor ensure arrangements for receipt, inventory, storage,
maintenance and safe handling of materials and equipment purchased by JIGPC that are
delivered directly to the job site.

• Check and review schedules and manning levels with the Contractors and review update

progress during the weekly meetings.

• Report to Site/Project Manager problem such as labour shortages, strikes, equipment delivery

slippages, availability of contract documents and drawings, etc., which threaten to adversely
affect job cost, schedule, quality, or safety.

• Ensure that the Contractors plan for non-destructive examination (NDE) of all systems and

maintains a log as indicated in the Construction Quality Audits, technical specifications or project
quality plan.

• Monitor and ensure the Contractors use latest version of IFC drawing for construction execution,

Supervisors are responsible to maintain a complete and up-to-date set of construction drawings
to guide Construction activities, ensure Contractor has up-to-date quality control documents.
Support document controller to make sure that all documents, memos, correspondence, etc.
indicate the project number and identification.

• Field progress photographs and piping/equipment oxygen cleaning photographs are to be taken

by discipline supervisors throughout the course of construction and neatly compiled and arranged.
Post the photographs on the designated share site for viewing by project team members.

• Evaluate Contractor’s performance at construction completion.
• Support Site/Project Manager organize construction lessons learning meeting as per project plan.

Share the lessons with whole department for better improvement.
V. MINIMUM REQUIREMENTS AND QUALIFICATIONS

• Bachelor of Technology in Mechanical Engineering.
• IRCA Certified ISO 9001-2015 QMS Lead Auditor.
• Certified CSWIP 3.1 Welding Inspector - TWI from UK (Certificate No. 299715/2).
• Certified CSWIP–BGAS Painting Inspector, Gr. II - TWI from UK (Certificate No. 441224)
• Certified API 570 Piping Inspector (Certificate No. 66050)
• Saudi Aramco SAP Number # 70008983 / 80011168 with CBT Approved (Welding & Piping

Specialist).

• ASNT Level II in RT, PT, MT, and UT.
• Strong Project & Construction management experience of large multi discipline sites.
• Organised, disciplined, able to perform under pressure and manage multiple priorities and parallel

tasks.

• Being a good team player, good communication and interpersonal skills.
• Ability to work in a multifaceted / multinational organizational matrix with a variety of working

relationships.

• Highly professional, confident, organized and possess the ability to interact well with people as

Team Leader and develop successful Teams.

• Willingness to travel and be based in any location

Advantages:

• Knowledge and experience of Oil & Gas, Thermal and Nuclear Power, Petrochemical, Refinery’s

and Green Hydrogen Energy (GHE) Projects.

• Knowledge and experience of EPC management.
• Possess an international driving licence.
• Air Products Experience with Project / Construction Coordination between home Office and Site.

We are the world’s largest hydrogen producer with over 80 years of industrial gas experience. We are hydrogen and industrial gas experts delivering safe, end-to-end solutions, investing in real, clean energy projects at scale, and driving the industry forward to generate a cleaner future.

At Air Products, we work in an environment where we put safety first, diversity is essential, inclusion is our culture, and each person knows they belong and matter. To learn more, visit About Air Products.